Wrought iron fence – The choice of fence materials, shape and design shall match the architecture and surroundings. Simple fence matches modern homes, while ornate fence more suitable for older residential areas. Unlike wood and concrete, open steel fences seem easier and enlarge the garden. Due to the different designs, it is easy to match them to any environment. The visual effect is not all. Steel fence is also very solid and difficult to climb. It is well protect from wind and weather, by galvanizing and powder coating.
Benefits of wrought iron fence in contrast to wood and concrete to gates and fences of iron work easier and magnifying the example garden. They can be design to match the architecture of the building and surroundings. In addition, they are more solid and difficult to climb.
The disadvantage of wrought iron fence is susceptibility to rust. The reason that most wrought iron fences are paint in thick black paint is to deter the inevitable rust, as they have known. The weather will eventually find a way through the paint and start to corrode iron, whatever you do. This fact means that you were have to paint your wrought iron fence and occasional scrape, sand or sandblasted it as well. Frequent painting can begin to obscure the attractive wrought iron over time.
Repairing Wrought Iron Fencing
Wrought iron fencing – As other types of fencing requires wrought iron maintenance to preserve its structural stability. The moisture will cause rust to form, leading to corrosion of the metal surface. It is best to do preventive maintenance to keep rust and corrosion away. You can repair minor cracks himself, but should seek an experienced welder for large holes and other problems.
Instructions to repair wrought iron fencing: Start a hose nozzle to setting the highest pressure. Hold a steel-brush brush firmly in one hand. Move the brush back and forth over the fence to remove large pieces of rust. Change a metal file. File the low-lying areas. Sand rounded portion with coarse sandpaper. Wipe away any particles shaving and sanding dust with a damp cloth. Spray the phosphoric acid in wrought iron fencing. Leave the acid on the surface overnight. The acid will convert invisible rust into a crust of iron phosphate. Brush off iron phosphate with a steel-brush brush. Mix two parts metal patch composite according to package instructions. You can buy the patch compound on an automotive shop. Choose an epoxy resin formula for best results. Pick up a small amount with a trowel and spread it into small cracks in the iron. Even out of the tip of the iron to create a seamless patch. Let the compound dry completely.