Interlocking pavers – Sign in to your air compressor, switch it to allow it to load and connect the hose with the nozzle of the vacuum cleaner. Wear safety goggles. Use air nozzle blow sand from joints around bricks to be removed. Be careful to point the nozzle directly in front of you. Enjoy your paver bricks to be removed with a brick of sponge soaked in warm water. This will lubricate the bricks and removes particles of sand still caught in the gap. Insert scraper stiff at one end and narrow slot lever over brick. Move the scraper into the slot on the opposite ends of narrow brick and dismantle the brick work above, up to the same height as the other side.
Brick works until one end is big enough to slide a flat bar drag end below. The lever end brick rises above the level of the surrounding brick. Take the bricks on the narrow end and pull it out. Replace damaged brick interlocking pavers in colors and patterns. Flip over the brick colored and reuse them, to save on repairs. The stain does not usually affect both front of paver.
Compacting new brick or turned back into the hole until the end of the long wooden post 4-by 4, or use a soil tamper with padded towel or other soft material. Fill in the gaps around the sand is replaced with brick firmly together and condense with tamper or messages. Interlocking pavers brick is a new innovation in the patio block for sidewalks, driveways and other outdoor areas. This is the installer, more to do the block, which made it the way it is blocked.